top of page
Complete Before Pickup or Shipping
1. Use Approved Containers
Only use the designated container type for each specific waste stream.
2. Apply Labels
All containers must be labeled at the time of storage.
3. Mark Accumulation Date
Clearly write the start date (the day you began filling the container) on the label.
4. Keep Waste Types Separate
Do not mix different types of waste within the same container.
5. Seal and Store Properly
Ensure containers are sealed securely and stored in a cool, dry area.
Capacity
CFL/PL
400w HID
U-Shape/Circular
750
340
170
Waste Capability
Below is a list of common items suitable for this container.
This list is not exhaustive—items with similar characteristics may also be accepted. For questions about specific items, please contact our customer support team at 888.657.5267.
Waste Type:
Lamps
LFL
Straight / linear fluorescent (T12,8,5, etc.)
Waste Type:
Lamps
LFL-JKT
Straight / linear fluorescent (T12,8,5, etc.) - jacketed / coated
Waste Type:
Lamps
HID-HPS
HID, mercury vapor, metal halide, low-high pressure sodium
Waste Type:
Lamps
CFL
Compact fluorescent, PL - 4 & 2 pin plug-in, Biax
Waste Type:
Lamps
UCFL
U-tubes & circular / round
Waste Type:
Lamps
INC
Incandescent - PAR floods, halogen, quartz
Waste Type:
Lamps
ARC
Arc (medical / dental UV-curing) / ignitron
Waste Type:
Lamps
UV
Ultraviolet, germicidal, suntan
Waste Type:
Lamps
UVW
UV/Optic Lamp - with wire
Waste Type:
Lamps
UVWC
UV/Optic Lamp - with wire & controller
Waste Type:
Lamps
LLED
LED - straight
Waste Type:
Lamps
LED
LED - all other styles - non linear
Waste Type:
Lamps
LED-PANEL
LED panel & troffer lights
Waste Type:
Lamps
NEON
Neon - sign / glow
Waste Type:
Lamps
PV
Projector - Xenon - cinema
Are you already a customer?
We’re glad to see you again. If you need help with scheduling, tracking, or anything else, our team is just an email away. Reach out anytime at service@nlr-green.com—we’ve got you covered.
Important Waste Type Information
Lamps
UNACCEPTED:
Intentionally broken
lamps / bulbs.
DO NOT CRUSH.
Do NOT crush lamps. Crushing can release mercury vapor, posing serious health risks. Some states prohibit lamp crushing entirely or require additional permits.
Batteries
Tape Requirements:
To prevent short circuits or fires:
-
Cover battery terminals with clear tape
-
OR place batteries in original packaging
-
OR bag individually
Note: Alkaline batteries do not require terminal protection and may be placed directly into the appropriate NLR container.
E-Waste
Handling Guidelines:
-
Avoid glass breakage (e.g., screens)
-
Secure containers on pallets
-
Store containers indoors
-
De-manufacturing or disassembly into components may require state licensing
Not Accepted:
-
Broken CRTs, LCDs, or monitors
-
Microwaves, smoke detectors, household appliances
-
Certain medical equipment and white goods
BALLASTS
Important:
-
Do not mix ballast types
-
Use separate, DOT-compliant containers for PCB and Non-PCB materials
MERCURY
Packaging Requirements:
-
All mercury devices must be secured in poly/plastic drums
Not Accepted:
-
Loose liquid mercury in non-compliant containers
-
Cracked or leaking mercury devices – These are classified as hazardous materials
Unacceptable Packing
✘ Damaged Containers
Containers that are wet, ripped, broken, or punctured are not allowed.
✘ Off-Spec Waste
Do not include trash, cardboard, plastic bags, or any other non-approved materials.
✘ Taped Waste Items
Waste items must not be taped together.
Exception: Only battery terminals should be taped for safety
✘ Broken or Leaking Waste
We cannot accept any items that are cracked, broken, or leaking.
✘ Exceeding Storage Time
Do not store universal waste beyond one year. Waste must be shipped or picked up within the one-year regulatory limit.
bottom of page