top of page

Fiber Drum

15.5" x 72"

ID - 8FD85

Capacity are estimates ONLY. Actual quantities depend on arrangement of waste items while packing containers. 

*WASTE TYPES CAN NOT BE MIXED

Complete Before Pickup or Shipping

1. Use Approved Containers

Only use the designated container type for each specific waste stream.

2. Apply Labels

All containers must be labeled at the time of storage.

3. Mark Accumulation Date

Clearly write the start date (the day you began filling the container) on the label.

4. Keep Waste Types Separate

Do not mix different types of waste within the same container.

5. Seal and Store Properly

Ensure containers are sealed securely and stored in a cool, dry area.

Capacity

T5
T8
T12

​350
170
30

Waste Capability

Below is a list of common items suitable for this container.
This list is not exhaustive—items with similar characteristics may also be accepted. For questions about specific items, please contact our customer support team at 888.657.5267.

Waste Type:

Lamps

LFL

Straight / linear fluorescent (T12,8,5, etc.)

Waste Type:

Lamps

LFL-JKT

Straight / linear fluorescent (T12,8,5, etc.) - jacketed / coated

Waste Type:

Lamps

LLED

LED - straight

Are you already a customer?

We’re glad to see you again. If you need help with scheduling, tracking, or anything else, our team is just an email away. Reach out anytime at service@nlr-green.com—we’ve got you covered.

Important Waste Type Information

Lamps

UNACCEPTED:

Intentionally broken
lamps / bulbs.

DO NOT CRUSH.

Do NOT crush lamps. Crushing can release mercury vapor, posing serious health risks. Some states prohibit lamp crushing entirely or require additional permits.

Batteries

Tape Requirements:

To prevent short circuits or fires:

  • Cover battery terminals with clear tape

  • OR place batteries in original packaging

  • OR bag individually

Note: Alkaline batteries do not require terminal protection and may be placed directly into the appropriate NLR container.

E-Waste

Handling Guidelines:

  • Avoid glass breakage (e.g., screens)

  • Secure containers on pallets

  • Store containers indoors

  • De-manufacturing or disassembly into components may require state licensing

Not Accepted:

  • Broken CRTs, LCDs, or monitors

  • Microwaves, smoke detectors, household appliances

  • Certain medical equipment and white goods

BALLASTS

Important:

  • Do not mix ballast types

  • Use separate, DOT-compliant containers for PCB and Non-PCB materials

MERCURY

Packaging Requirements:

  • All mercury devices must be secured in poly/plastic drums

Not Accepted:

  • Loose liquid mercury in non-compliant containers

  • Cracked or leaking mercury devices – These are classified as hazardous materials

68.jpg

Unacceptable Packing

✘ Damaged Containers

Containers that are wet, ripped, broken, or punctured are not allowed.

✘ Off-Spec Waste

Do not include trash, cardboard, plastic bags, or any other non-approved materials.

✘ Taped Waste Items

Waste items must not be taped together.
Exception: Only battery terminals should be taped for safety

✘ Broken or Leaking Waste

We cannot accept any items that are cracked, broken, or leaking.

✘ Exceeding Storage Time

Do not store universal waste beyond one year. Waste must be shipped or picked up within the one-year regulatory limit.

Call 877.822.4733
bottom of page